Hi Matthias,
thanks for the input. I did exactly that and it still doesn't work for me. I've set up the output types for each label, assigned them to a procedure and assigned that to the packing material types.
I've also set up one record per packing station and label with the printer assigned to it.
If I set up the vv61 without any printer at all, I don't get an output when I create an HU from hupast and save it.
If I set it up with an invalid printer, I get an output for the HU - but on the invalid printer and not the printer that I set up for tha packing station and the output type.
This is what it looks like when I check the HU output from vl03n.
What DOES work is a modification. When I call the "print_hu" in the save_hus in a loop for all HU, I get the labels on the correct printer because that "print_hu"- replaces the printer from the output with the printer from the packing station customizing.
However, that only works when I call it before the actual save is called and that still gives me the problem that unsaved data is printed (if something goes wrong in the saving). And in addition to that I have another modification.
regards
Christian